3D Nanomolding and Fluid Mixing in Micromixers with Micro-patterned Microchannel Walls




Farshchian, Bahador
Amirsadeghi, Alborz
Choi, Junseo
Park, Daniel S.
Kim, Namwon
Park, Sunggook

Journal Title

Journal ISSN

Volume Title




Microfluidic devices where the microchannel walls were decorated with micro and nanostructures were fabricated using 3D nanomolding. Using 3D molded microfluidic devices with microchannel walls decorated with microscale gratings, the fluid mixing behavior was investigated through experiments and numerical simulation. The use of microscale gratings in the micromixer was predicated by the fact that large obstacles in a microchannel enhances the mixing performance. Slanted ratchet gratings on the channel walls resulted in a helical flow along the microchannel, thus increasing the interfacial area between fluids and cutting down the diffusion length. Increasing the number of walls decorated with continuous ratchet gratings intensified the strength of the helical flow, enhancing mixing further. When ratchet gratings on the surface of the top cover plate were aligned in a direction to break the continuity of gratings from the other three walls, a stack of two helical flows was formed one above each other. This work concludes that the 3D nanomolding process can be a cost-effective tool for scaling-up the fabrication of microfluidic mixers with improved mixing efficiencies.Graphical abstractIn this paper we show that a micromixer with patterned walls can be fabricated using 3D nanomolding and solvent-assisted bonding to manipulate the flow patterns to improve mixing.



advection, flow patterns, secondary flow, surface structures in microchannel, 3d modeling, Ingram School of Engineering


Farshchian, B., Amirsadeghi, A., Choi, J., Park, D. S., Kim, N., & Park, S. (2017). 3D nanomolding and fluid mixing in micromixers with micro-patterned microchannel walls. Nano Convergence, 4(4).


Rights Holder

© Korea Nano Technology Research Society 2017.

Rights License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Rights URI