Evaluation of Petroleum Resin in Rubberized Asphalt Binder




Kim, Hyun Hwan
Mazumder, Mithil
Lee, Moon-Sup
Lee, Soon-Jae

Journal Title

Journal ISSN

Volume Title


Multidisciplinary Digital Publishing Institute


The crumb rubber modified (CRM) binder was evaluated considering the general operating temperatures of high, intermediate, and low temperatures. CRM binders were produced with four different contents (0, 5, 10, and 15%) using the base asphalt binder (PG64-22). Then, they were artificially aged by a rolling thin-film oven (RTFO) and pressure aging vessel (PAV). Superpave binder tests using a rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometer (BBR) was applied to characterize the performance of the original and aged binders. Multiple stress creep recovery (MSCR) tests were also performed for deeper rutting characterization. The results of this study are as follows: (1) the presence of PR increases the binder viscosity, (2) the integration of CRM greatly improved the rutting resistance of the binder, and it was found that PR also improved the rutting characteristics, and (3) it is observed that PR is detrimental to the cracking properties of CRM binders.



CRM binder, PR, rutting, Cracking, MSCR, Engineering Technology


Kim, H. H., Mazumder, M., Lee, M. S., & Lee, S. J. (2021). Evaluation of petroleum resin in rubberized asphalt binder. Sustainability, 13(16), 9319.


Rights Holder

Rights License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Rights URI